BoonDocker Status Bar

The Status Bar displays the Latitude / Longitude in Decimal Degrees (Dec Deg) or Degrees, Minutes, Seconds (DMS).  User can set the units in the Display >> Units Menu. 

The Status Bar background color will change depending on GPS mode. 

A Red Background signifies that the GPS is connected and On-Line but NOT receiving an Active set of coordinates.

A Green Background signifies that the GPS is connected and On-Line and receiving an Active set of coordinates.

A Blue Background signifies that the GPS is may or may not be connected but is currently Off-Line.

When initializing BoonDocker the user has the option to connect to the GPS or work offline.  See the GPS COM Port menu when first bringing up BoonDocker.

When On-Line the Status Bar will include one of the following:

Elapsed Time

Displays the Elapsed Time in hh:mm:ss.  The user has the option to Reset the Elapsed Time to zero.

GPS Speed

Displays the current GPS Speed in Mile per Hour or KiloMeters per Hour.  User can set the units in the Display >> Units Menu.

GPS Heading

Displays the current GPS Heading.  North is Zero then Clockwise to 359 degrees.

GPS Antenna Elevation

Displays the current GPS Elevation in Feet / Meters.  User can set the units in the Display >> Units Menu.

Locator Distance

This option is only active if the user has enabled the Locator or WayPoint Locate mode.  The distance is display in Feet / Yards / Miles / Meters / KMeters.  User can set the units in the Display >> Units Menu.

Menu Buttons

Press Menu Buttons along bottom of Dialog to initiate selected option.

OK	Saves current settings of the dialog then Exits.
Cancel	Cancels the current settings reverting to setting prior to loading the dialog then Exits.
?	Initiate Help for the current dialog.