BoonDocker Locate WayPoint

The Locating a WayPoint mode assists users, via the use of a yellow locating arrow showing the heading, to locate a selected WayPoint from the current set.  Once within a minimal radius of the location the locating arrow will not be displayed.

WayPoint Name

The user selects from the sorted list of current loaded WayPoints the WayPoint to locate.  The selected WayPoint Symbol will be displayed.

Elevation

The GPS Elevation or the NED Elevation Point if NED Elevation data available or the value is N/A (Not Available).

Lat (Latitude)

Displays the Latitude of the selected WayPoint.  Displayed in the current Display Unit option.

Long (Longitude)

Displays the Longitude of the selected WayPoint.  Displayed in the current Display Unit option.

Cmt (Comment)

User Comment for the selected WayPoint.

Des (Description)

User Description for the selected WayPoint.

Enable

The Enable Check Box must be checked to enable Locating a WayPoint Mode.   User must manually disable the Locating a WayPoint Mode by returning to Locating a WayPoint menu or the Locator menu.

The selected WayPoint Latitude / Longitude location will also be loaded into the Locator menu.

Menu Buttons

Press Menu Buttons along bottom of Dialog to initiate selected option.

OK	Saves current settings of the dialog then Exits.
Cancel	Cancels the current settings reverting to setting prior to loading the dialog then Exits.
?	Initiate Help for the current dialog.